Trying to git clone a repository over ssh in Netbeans 8.2 displaying an error message saying “Incorrect credentials for repository at ssh://” gave me a bit of a headache. I could successfully connect to the repository server using ssh from the terminal in my Mac running OSX. After spending some time troubleshooting I tried to […]
After an update I had the error message saying: Error Regular Labs Library plugin is outdated. Try to re-install Modals. Modals cannot function.Regular Labs Library plugin is not enabled. Modals cannot function.Regular Labs Library plugin is not enabled. Articles Anywhere cannot function. In my case, the extension causing this was cause by Articles Anywhere. Solution: […]
In order to improve perfomance there are recommendations to set the MTU for the iSCSI interface to MTU 9000 instead of the default 1500. To do this, it important that you set MTU to 9000 on all devices involved; FreeNAS network interface, VMware NICs and vSwitch and all switch ports on the switches connecting those. […]
When restoring an Akeeba backup of a WordPress site the restore process was interrupted with the error message saying 1118 – Row size too large (>8126). Solution: Use SSH to log in to your database server Edit /etc/mysql/my.cnf or if you use a config file under /etc/mysql/conf.d, edit that one Under the [mysqld] section add:internal_tmp_disk_storage_engine=MyISAMinnodb_strict_mode […]
When using Contact Form 7 forms in a site where the All-in-One Intranet plugin is installed, it will not be possible to submit the CF7 forms. The solution is quite simple. In the Advanced settings of the Contact Form 7 form, add the line: subscribers_only: true
When looking for the latest iLO2 firmware for HP Proliant DL380 Gen 5 on the HPE website I found version 2.27 dated in 2015. To resolve browser issues with modern browsers I wanted to find a later firmware. On this site you will find an exellent collection of all the latest iLO firmwares: https://pingtool.org/latest-hp-ilo-firmwares/ The latest […]
When getting the latest IPMI firmware for your Supermicro server, you need to know what model of the motherboard your server has. Often the server lives in a datacenter somewhere and you don’t want to go there, take down the server, pull it out of the rack and investigate it. If you are running Linux […]
After a WordPress site move to new hosting, some images wouldn’t load and investigating the php error log revealed: open_basedir restriction in effect. File(/) is not within the allowed path(s) The solutions was to edit the database using phpMyAdmin, go to the table wp_options and set the correct value for upload_path.
On a VMware 5.5 ESXi host I suddenly experienced guest machined that hanged or froze. I had to reset the guest machine to get it up and running again. In the Events tab I could see entries like below at the time of freezing. Lost access to volume 51d15c1a-17706da4-0ae6-001f29e5c998 (datastore1) due to connectivity issues. Recovery […]
When trying to install an APS package on a ISPConfig3 system, the package was never installed and the status “installation_task” remained for the site I tried to install a package. Investigating /var/log/ispconfig/cron.log revealed: PHP Fatal error: Uncaught Error: Call to undefined function curl_init() in /usr/local/ispconfig/server/lib/classes/aps_installer.inc.php:627 This problem can occur when curl is not installed on […]