Connect ham radio rig to Cloudlog (Windows)

By connecting your amateur radio rig using a CAT/CI-V interface to Cloudlog you save a lot of work by getting frequency, mode etc directly from the rig into Cloudlog. This is how you do it using a Windows computer. The computer must be located where the radio is as it will be physically connected via the CAT/CI-V interface to the readio. Cloudlog is normally run on a web server on the Internet, i.e. not necessarily on the computer by the radio (hence the name, Cloudlog ;).

This is a very nice setup if you are running your station remotely. When logging into Cloudlog from a computer on your remote location, you can still get realtime frequency, mode etc from the radio into Cloudlog.

1. In Cloudlog, click on your callsign (at right in the menu) and go to API keys. Create a new API key and copy it.
2. Go to OmniRig, download it and install it
3. Go to CloudLogCAT, find the latest release, download it and install it
4. Run CloudLogCAT and go to Settings -> CloudLog. Enter your Cloudlog website URL and API key from step 1 above. Click Save.
5. Go to Settings -> OmniRig. OmniRig window will now open. Select your radio, com port and speed. Save by clicking OK.
   

If all worked well, frequency, mode etc will be syncing to Cloudlog.

In Cloudlog, you can click on your callsign (at right) and select Hardware Interfaces. After a couple of seconds your OmniRig connection should show up.

You can now select this radio under Station / Radio when logging QSO:s.