VW e-up parking break adjustment

Adjusting the parking break on VW e-up is quite easy. It requires a couple of screwdrivers and a 10 mm wrench.

In the bottom of the rear cup holder, use a little flat screwdriver to remove the screw cover.

Find the screw covered by a cup in the bottom of the rear cup holder.
Use a small flat screw driver to remove the screw cover.
Remove the torx screw, lift the console a little and push it forward to remove it.
Use a 10 mm wrench to adjust the parking break to the desired tension. Reassemble everyting in reverse order.
Exit mobile version